You can assign a VLAN ID to an appliance network port or bond.
Use the following guidelines when assigning a VLAN ID:
The selected network interface must be plugged.
The selected network interface cannot be a part of a bond.
The selected interface cannot have an IP address assigned to it.
If an IP address is assigned to the selected interface, you must first remove that IP address before you attempt to assign a VLAN ID.
To assign a VLAN tag
Log on to the Velocity shell menu.
From the Main_Menu > Network view, type the following command:
VLAN Tag <VLANID><InterfaceName>
[[IPAddress]]
[[Netmask]]
Where <VLANID> is the VLAN identifier (1 - 4094) and <InterfaceName> is the name of the interface to which you want to assign the VLAN tag. The
[[IPAddress]]
parameter can be an IPv4 or an IPv6 address and the
[[Netmask]]
parameter is the netmask (IPv4) or prefix length (IPv6).
Searching...
